Smt pick and place machine, Stencil Printer, Reflow Oven Manufacturers
Qihe Electrical Technology Co., Ltd.
In some industrial applications, many capacitor banks are often used, which are equipped with protections such as quick break, overcurrent, overvoltage, and voltage loss. However, there may still be tripping caused by capacitor faults. What is the problem and how to solve it?Today qihe smt pick and place machine sharing how to solve the problem of tripping due to capacitor failure .
Avoid penalties for non-compliance–Designers need to follow regulations regarding electromagnetic compatibility (EMC) when designing PCBs because failing EMC testing could lead not only do fines but also to loss of customer trust which could cause irreparable damage even if those penalties eventually get waived.
Radio frequency is measured in units called hertz (Hz), which represent the number of cycles per second when a radio wave is transmitted. One hertz equals one cycle per second; radio waves range from RF Interferences,Mobile Phones,pick and place machine
Decoupling capacitors should be placed as close as possible to the source for the signal being decoupled. This means at the pin for ICs and near the connector for input and out signals. To remove LF transients from input and output signals, the capacitor should be placed in series with the trace.
Most capacitors are designed to withstand a certain temperature range, so you must select a capacitor with a temperature rating suitable for the environment in which your circuit is used. If the voltage or temperature rating exceeds, the capacitor can fail and cause damage to the board or other
Smart lights are Wi-Fi-enabled devices that connect to the internet using wireless networks. Certain smart light bulbs require a dedicated smart hub to connect with wirelessly, with the hub then plugging into an internet router.
Since China national day is almost here.
Sending the most sincerely blessings from Qihe team .
Radio frequency (RF) designs operate at high frequencies, and they require careful layout and routing to prevent signal integrity problems.
Suppose you are in the planning stage of an IoT project. You have a lot of choices to make, and maybe you don’t know where to start: in this article, we focus on how to think about this issue in terms of standards, protocols, and frameworks for wireless communications.Today qihe smt pick and place machine […]
he spectrum of wireless communication is limited and the allocation is very strict. Electromagnetic waves of the same bandwidth can only be used once. In order to solve the problem of too many peopl