SMT placement machine is a necessary placement equipment in the SMT production process. Compared with manual placement, SMT placement machine can greatly improve the efficiency of SMT placement. As a high-tech product, safe and correct operation is very important for machines and people. The most basic of safe operation of the placement machine is that the operator should have the most accurate judgment and use the smt placement machine correctly.
The core equipment in SMT placement processing is the SMT placement machine. The SMT placement machine is used to achieve high-speed, high-precision and fully automatic placement of components. It is the most critical and complex in the entire SMT production. equipment. The SMT placement machine is the main equipment in the SMT production line. The SMT placement machine has developed from the early low-speed mechanical placement machine to the high-speed optical centering placement machine, and is developing towards multi-functional, flexible connection and modularization. SMT placement machine is a high-tech product, safe and correct operation is very important to the machine and to people. The most basic of safe operation of SMT placement machine is that the operator should have the most accurate judgment and follow the following basic safety rules.
The operator of the SMT placement machine should receive the operation training under the correct method; check the SMT placement machine, replace parts or repair and turn off the power when internal adjustments (the maintenance of the machine must be done when the emergency button is pressed or the power is turned off. Proceed; make sure that the YPU (programming component) is in your hands to stop the machine at any time when “reading the coordinates” and adjusting the machine; make sure that the “interlocking” safety equipment remains effective to stop the machine at any time, the safety inspection on the SMT placement machine, etc. Do not skip or short-circuit, otherwise personal or machine safety accidents are likely to occur; only one operator is allowed to operate a machine during production; during operation, make sure that all parts of the body, such as hands and heads, are outside the moving range of the machine; The SMT placement machine must be properly grounded (real ground, not the neutral wire); do not use the SMT placement machine in an environment with flammable gas or extremely dirty.
It is strictly forbidden to operate the SMT placement machine without training; safety first, the SMT placement machine operator should operate the machine strictly in accordance with the operating specifications, otherwise it may cause damage to the machine or endanger personal safety; the SMT placement machine operator should Be careful and careful.